Requires Designer Super Detacher for removal from bottle.

The post Slimline Bottle Tag (8.2MHz, White) – Pack of 100 first appeared on Security Tags.

Mini Pencil Security Tags are a cost-effective way for retailers to protect, monitor and secure merchandise. They are suited for clothing items such as shirts, pants, jackets, and shoes. They can also be used with a lanyard instead of a pin to protect items with a hole to loop into. This can include screwdrivers, power tools, and handbags, or can protect apparel items without poking a hole by looping the lanyard through a buttonhole or a belt loop. These tags will cause your Electronic Article Surveillance (EAS) system to beep and alarm if the unpaid merchandise (and the pencil tag) have passed through the gate. They are nearly impossible to remove without a detacher and are resistant to tampering.

Mini Pencil Tags can decrease shoplifting in your store. They are one of the best loss prevention tools because they prevent shrinkage by acting as both a visual deterrent to theft, a physical obstacle for shoplifters to remove and likely draw attention to themselves, and work with your EAS gates to notify you of any theft.

Key Features:

• Sleek and minimalist design with a black body
• Wireless: the alarming mechanism is inside the tag.
• Easy to attach to clothing with a flathead pin or attached to a lanyard.
• Quick and easy removal at checkout with a Universal Superlock Detacher
• Reusable: These pencil mini tags do not contain any batteries and can be reused over and over again.

Benefits:

• Clothing, other apparel, and anything that you can loop a lanyard around and into the Pencil Mini Security Tag can be protected without changing or damaging the product’s visual appearance. The sleek, black body and minimalist design make the tag look stylish and versatile to many different retail aesthetics.
• It is close to impossible to remove Pencil Mini Tags without a very powerful magnet, such as the Universal Superlock Detacher. Most casual shoplifters would avoid interfering with this security tag to avoid being caught.
• Mini Pencil Tags are completely wireless. The EAS technology is inside the tag. This means there are no wires for shoplifters to cut or become tangled in your product. Since there is no battery, the Pencil Mini Tag has an endless loss prevention life in your store if it is undamaged.
• The tag is incredibly simple to attach to your products.
  • With a pin: Simply choose where you would like the tag to go on your garment. Poke the pin through the item and then insert the tag on top in its hole. You should feel a click and the tag is in place.
  • With a lanyard: Put the lanyard through a hole or loop and wrap it around the lanyard’s little hole. Once this is done, attach the pencil tag to the end of the lanyard’s pin. You should feel a click once more and the tag is in place.
• Pencil Mini Tags are also very easy to remove. Simply connect the side of the tag opposite to where you inserted the lanyard or pin to a detacher. The magnet should loosen and release the tag and you will be able to pull it out easily.
• Pencil Mini Clothing Security Tags are an affordable solution to the theft of apparel and many other items. With their nearly endless shelf life, Pencil Mini Tags can be used repeatedly if they remain intact and unharmed.

Mini Pencil Tags come in packs of 100 with pins!

All Pencil Mini Tags come with 16mm grooved pins. Grooved pins have a better locking capability than smooth pins. Smooth pins are ideal for lingerie or swimwear store as the materials are thin and grooved pins are more likely to damage the apparel (unless a lanyard is used).

A variety of other kinds of pins and lanyards can be found here.

The post Pencil Mini Clothing Security Tag (8.2MHz, Black) – Pack of 100 first appeared on Security Tags.

Screamer Tags are an excellent way for retailers to protect, monitor and secure expensive merchandise. This usually includes luxury items such as leather and suede coats, designer bags, and luggage. These tags provide two levels of protection: alerting you both when the item’s tag has been tampered with (like being cut or ripped out of the lock) and notifying your Electronic Article Surveillance (EAS) system that the unpaid merchandise (and the screamer tag) have passed through the gate.

Screamer Tags can significantly decrease shoplifting in your store. They prevent shrinkage by acting as a visual deterrent to theft, a physical obstacle for shoplifters, and a self-alarming security unit for your business.

Key Features:

• Sleek design with a black body
• Two levels of protection: alerting you at the door and if interference occurs
• Self-alarming: one of the few tags that produce their own alarm in case of theft or damage
• Easy to setup and tag items with
• Simple to remove at checkout with a Universal Superlock Detacher
• Long battery life of around 2-3 years after the first activation

Benefits:

• Higher-ticket items like handbags, backpacks, shoes, tool kits, coats, and any other product with a secure loop can be protected without altering the product’s, or your store’s, aesthetic.
• Extra levels of protection and alarming capabilities ensure that your product will be as secure as possible when armed with a Screamer Tag. It is nearly impossible to remove Screamer Tags without a very powerful magnet, such as the Universal Superlock Detacher.
• The Screamer Tag’s loud alarm can alert staff members to the potential theft taking place. The alarm will continue sounding until it is deactivated by a staff member or it runs out of battery. Either way, the self-alarming capabilities of the Screamer Tag will allow your staff to always be in the know.
• The tag is incredibly simple to attach to your products. All you need to do is wrap the pin around a secure loop on your product and insert the pin into the hole.
• It is even easier to remove or disarm the tag. Simply put the Screamer Tag over top of a Detacher. If you hover the opposite side to where you inserted the pin over the magnet, it should come apart easily.
• Screamer Tags are an inexpensive solution to the theft of higher-end goods. With their long shelf life of around 2 to 3 years, Screamer Tags can be used repeatedly if they remain intact and unharmed.

Screamer Tags come in packs of 10!

The post Self-Alarming Screamer Tags (RF 8.2 MHz) – Pack of 10 first appeared on Security Tags.

Spider Tags, also called Spider Wraps, are an effective way for retailers to protect, monitor and secure expensive merchandise. This usually includes boxes of electronics such as televisions, stereos, monitors, computer parts, and headphones, or other boxes of higher-cost items such as tool kits, encyclopedias, books, boxed wine and other alcohol. These tags provide two levels of protection: alerting you both when the item’s tag has been tampered with (like being cut or ripped out of the lock) and notifying your Electronic Article Surveillance (EAS) system that the unpaid merchandise (containing the spider tag) have passed through the gate.

Spider Tags can significantly decrease shoplifting in your store. They prevent shrinkage by acting as a visual deterrent to theft, a physical obstacle for shoplifters, and a self-alarming security unit for your boxed and rectangular products.

Key Features:

• Sleek and elegant design with a black body and black wires
• Two levels of protection: alerting you at the door and if tampered with
• Self-alarming: one of the few tags on the market that can sound their own alarm in case of theft or interference
• Simple to setup and tag items with
• Easy to remove at checkout with a Universal Superlock Detacher
• Long battery life of around 2-3 years after the first activation

Benefits:

• Higher-ticket items like televisions, stereos, monitors, computer parts, headphones, or other boxes of higher-cost items can be protected without harming the product’s, or your store’s, aesthetic.
• The extra level of protection and alarming capabilities ensure that your product will be as secure as possible when armed with a Spider Tag. It is nearly impossible to remove Spider Tags without an incredibly powerful magnet, such as the Universal Superlock Detacher.
• The Spider Tag’s loud alarm can alert staff members to the potential theft taking place. The alarm will continue sounding until it is deactivated by a staff member or it runs out of battery. Either way, the self-alarming capabilities of the Screamer Tag will allow your staff to always be aware of when someone has tried to shoplift tagged items.
• The tag is incredibly easy to arm your products. All you need to do is:
  • Connect the detacher to the top and press the button on the side to “deactivate” the Spider Tag
  • Twist the tag counterclockwise to loosen the wires
  • Wrap the wires around your boxed or cube/rectangle-shaped product so that one cord is on each side. When it is secured, twist clockwise until it is secure.
  • Press the button on the side and continue to twist the tag as tight as you would like it. This will make a tightening noise.
  • All done!
• It is even easier to remove or disarm the tag. Simply put the Spider Tag over top of a Detacher. Simply:
  • Press the button on the side (the one you used to arm and secure the product) and it should immediately loosen.
  • Twist counterclockwise to continue loosening the tag.
  • Put the Spider Tag aside and it can be reused
• Spider Tags are a cost-effective solution to the shrinkage of more expensive items. With their long shelf life of around 2 to 3 years, Spider Tags can be used repeatedly if they remain intact and unharmed.

Spider Tags come in packs of 10!

The post Self-Alarming Spider Tags (RF 8.2 MHz) – Pack of 10 first appeared on Security Tags.

The post INEO Clarity EAS System – Starter Package first appeared on Security Tags.

Requires the Designer Super Detacher for removal from bottles.

The post Bottlelox XL (RF 8.2MHz & AM 58KHz) Pack of 72 first appeared on Security Tags.

Requires Designer Super Detacher for removal from the bottle.

The post Bottle Tag (8.2MHz, Black) Pack of 100 first appeared on Security Tags.

This pin is 3/4″ in length and is used in place of the 5/8″ pin when the material being tagged is thick or heavy.

The post Flathead Grooved Pin (3/4″) Pack of 1000 first appeared on Security Tags.

The post Eyeglass Tag (8.2MHz, Grey) Pack of 100 first appeared on Security Tags.

This Clothing Security tag is also sometimes referred to as a “Golf Shaped tag” or “Clam Shell tag” due to its unique design. It combines great detection capability with a visually appealing design. It looks elegant and modern while at the same time being one of the hardest tags for would-be thieves to try to defeat. The clam shell type design means there is no opening to try to cut the tag off or to even pry open while the ink packs prevent any attempt to smash the tag and still be able to use the product.

Requires Provent Super Designer Detacher for removal.

The post Designer Tamper Resistant Clear Ink Clothing Security Tag (8.2MHz, 2.16″, Clear) Pack of 500 first appeared on Security Tags.